Back to Main Models
Menu |
Home
GLUES, Filler, Dope, Thinners, Sealant & Fuel Proofer
SOLVENTS
Acetone
(clean off epoxy) 200ml bottle available
Fuel Proofer twin bottle set Available
Balsa Loc Primer bottle Available
Dope 250ml can Available
Sanding Sealer 250ml can Available
Thinners 125ml can Available
FILLERS & THICKENERS
Spachtel Fast Liteweight White Filler Available
Thixotropiermittel (see above)
Thickening agent for epoxy resin and polyester resin. 250 ml Available
Threadlock and Bearing Fixatives
UHU Blue Treadlock fluid Available
Loctite 603 Red Bearing Fixative fluid Available
Glues
A
selection of cyano glues in the thin medium & thick formulas with both the
standard and needle dispenser tops
CYANO DEBONDER 10ml bottle Available
CYANO ACTIVATOR Acellerator Spray
Accelerates setting time on all usual commercial superglues. The cyanogen acrylate adhesive hardens immediately when sprayed 9.20
Cyano Gel Very Thick
Gel, thick gel 3g tube Available
Cyano Thick
Consistent to touch after 20 – 60 seconds following gluing
large 20g bottle Available
Cyano Medium Viscosity
Consistent to touch after 10 – 40 seconds following gluing
large 50g bottle Available
med 20g bottle Available
small 10g bottle Available
Cyano Thin Liquid
Very liquid, instant setting time, Consistent to touch after 1 – 10 seconds following gluing 20g bottle Available
The
most popular modellers glue, strong & waterproof
Epoxy Glue, 5 min worktime, 5 min set time
Fast drying, dual component epoxide resin, adhesive, containing no solvents or filling, material, of honey-like viscidity.
Particularly suitable for wood, metal, stone, polyurethane and many plastics.
Mix ratio: 1:1 parts by weight/volume resin:hardener. Processing time: 5 minutes. Can be subjected to strain after 10 minutes.
5 Min Epoxy Glue 28g in tubes Available
5 Min Epoxy Glue 100g in bottles Available
5 Min Epoxy Glue 200g in bottles Available
30 min Epoxy Glue 256g / 9oz bottles Available
UHU Hart for any balsa wood model 35g tube Available
WHITE WOOD GLUE
Titebond PVA 4oz bottle Available
ALIPHATIC GLUE
Ponal Express,
120g, faster, dries harder, sandable,good for canopies Available
SPACE AGE GLUES
Stabilit Express Cement, 30g,
Sticks anything to anything Available
PU UNIVERSAL GLUE
Polyurethane Foam Glue, 5oz, foams to fill gaps Available
PLASTIC KIT GLUES
The choice for makers of plastic models
UHU Plast Spez 31g Available
UHU Plast Spez 17g bottle Available
METAL
ADHESIVE E
This comes in twin bottles of glue & hardener, but you can vary the % mix to suit the job. It can stand temperature variations & the resulting metal expansion & contraction very well when set.
Dual component epoxide adhesive for metal, particularly suitable for aluminium. Good adhesive force, adapted for toughness. The adhesive will not crack even if the metal is heated. The heat resistance once the adhesive has hardened is over 100 °Celsius.
The mix ratio is variable due to the use of polyaminoamide hardener. E Metal Adhesive can be mixed at a ratio of 100:100 to 100:50 parts by weight. The most frequently applied mix ratio is 100:100 (= 1:1).
Determination of adhesive consistency.
Processing time: c. 90 minutes (mix ratio 1:1)
Processing time: c. 120 minutes (mix ratio 100:50).
High adhesive force even when used in connection with wood and GRP –jointly and mutually.
Metal Adhesive E 100g Available
Back to Main Models Menu | Home