How to make a DELTA  from Depron foam ....

PIBROS is a very practical flying wing designed by Marcel Guwang (right). In the beginning it was made as a soaring glider-delta.
However PIBROS suits the cheap speed 400 motor very well, and with an 8 x KAN1050 or GP1100 battery for power will give 10 minutes of very hot flight.
A good size for Speed 400 power is 1 metre wingspan, or 135% x original size.

 The Depron can be got from www.greenhobbymodel.com Green Hobby & Model, the hobby shop in Dublin Tel 01 4928776.  Most Pibros are done in  done in 3mm depron, with balsa for motor mounts.   

Pibros Information , plans, and Instructions are located  HERE
 

	Marcel's  Pibros Page	Speed 400 Pibros Pics
			Cutting Measurements